Advances in two-dimensional transition metal dichalcogenides-based sensors for environmental, food, and biomedical analysis: A review.

Transition metal dichalcogenides (TMDCs) are versatile two-dimensional (2D) nanomaterials used in biosensing applications due to their excellent physical and chemical properties. Due to biomaterial target properties, biosensors' most significant challenge is improving their sensitivity and stability. In environmental analysis, TMDCs have demonstrated exceptional pollutant detection and removal capabilities. Their high surface area, tunable electronic properties, and chemical reactivity make them ideal for sensors and adsorbents targeting various contaminants, including heavy metals, organic pollutants, and emerging contaminants. Furthermore, their unique electronic and optical properties enable sensitive detection techniques, enhancing our ability to monitor and mitigate environmental pollution. In the food analysis, TMDCs-based nanomaterials have shown remarkable potential in ensuring food safety and quality. These nanomaterials exhibit high specificity and sensitivity for detecting contaminants, pathogens, and adulterants in various food matrices. Their integration into sensor platforms enables rapid and on-site analysis, reducing the reliance on centralized laboratories and facilitating timely interventions in the food supply chain. In biomedical studies, TMDCs-based nanomaterials have demonstrated significant strides in diagnostic and therapeutic applications. Their biocompatibility, surface functionalization versatility, and photothermal properties have paved the way for novel disease detection, drug delivery, and targeted therapy approaches. Moreover, TMDCs-based nanomaterials have shown promise in imaging modalities, providing enhanced contrast and resolution for various medical imaging techniques. This article provides a comprehensive overview of 2D TMDCs-based biosensors, emphasizing the growing demand for advanced sensing technologies in environmental, food, and biomedical analysis.

Recent advances in microbial engineering approaches for wastewater treatment: a review.

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

Microbial engineering approaches for wastewater treatment.Current and emerging sources of water pollution are discussed.Various treatment technologies for wastewater treatment.Biological methods and microbes are used for degradation.Parameters responsible for the degradations processes of wastewater.

Sustainable approaches towards green synthesis of TiO2 nanomaterials and their applications in photocatalysis-mediated sensing to monitor environmental pollution.

Nanomaterials are gaining enormous interests due to their novel applications that have been explored nearly in every field of our contemporary society. In this scenario, preparations of nanomaterials following green routes have attracted widespread attention in terms of sustainable, reliable, and environmentally friendly practices to produce diverse nanostructures. In this review, we summarize the fundamental processes and mechanisms of green synthesis approaches of TiO2 nanoparticles (NPs). We explore the role of plants and microbes as natural bioresources to prepare TiO2 NPs. Particularly, focus has been made to explore the potential of TiO2 -based nanomaterials to design a variety of sensing platforms by exploiting the photocatalysis efficiency under the influence of a light source. These types of sensing are of massive importance for monitoring environmental pollution and therefore for inventing advanced strategies to remediate hazardous pollutants and offer a clean environment.

Sustainable valorization of water hyacinth waste pollutant via pyrolysis for advance microbial fuel investigation.

Present study has been focused on the bio-energy potential of waste biomass (water hyacinth leaves and its stem). Pyrolysis of both biomasses were investigated at five different heating rates (5-25 °C/min) using thermogravimetric analyzer. For both biomasses, maximum thermal degradation occurred within the temperature range of 200-400 °C, which is the active pyrolytic zone. Three non-iso-conversional (degradation models) including the Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa, and Starink were used to calculate the activation energy of both biomasses. The activation energy was around 92-98 kJ/mol for water hyacinth leaves and 151-153 kJ/mol for water hyacinth stems. The results suggest that these low-cost abundantly available biomasses have a good potential for the production of solid bio-fuel.

Impact of nanomaterials on sustainable pretreatment of lignocellulosic biomass for biofuels production: An advanced approach.

Biomass to biofuels production technology appears to be one of the most sustainable strategies among various renewable energy resources. Herein, pretreatment is an unavoidable and key step to increase free cellulose availability and digestibility to produce green fuels. Various existing pretreatment technologies of lignocellulosics biomasses (LCBs) face distinct challenges e.g., energy consuming, cost intensive, may lead partial removal of lignin, complex inhibitors production as well as may cause environmental pollutions. These, limitations may be overcome with the application of nanomaterials, employed as nanocatalysts during the pretreatment process of LCBs. In this prospect, the present review focuses and summarizes results of numerous studies and exploring the utilizations of magnetic, carbon based nanostructure, and nanophotocatalysts mediated pretreatment processes along with their possible mechanisms to improve the biofuels production compared to conventional chemical based pretreatment approaches. Furthermore, different aspects of nanomaterials based pretreatment methods with their shortcomings and future prospects have been discussed.

Towards enhancement of fungal hydrolytic enzyme cocktail using waste algal biomass of Oscillatoria obscura and enzyme stability investigation under the influence of iron oxide nanoparticles.

Development of low-cost and economic cellulase production is among the key challenges due to its broad industrial applications. One of the main topics of research pertaining to sustainable biomass waste based biorefinaries is the development of economic cellulase production strategies. The main cause of the increase in cellulase production costs is the use of commercial substrates; as a result, the cost of any cellulase-based bioprocess can be decreased by employing a productive, low-cost substrate. The goal of the current study is to develop low-cost cellulase using the carbohydrate-rich, renewable, and widely accessible cyanobacteria algae Oscillatoria obscura as the production substrate. Maximum cellulase was produced utilising the fungus Rhizopus oryzae at substrate concentration of 7.0 g among various tested concentrations of algal biomass. Maximum production rates of 22 IU/gds FP, 105 IU/gds BGL, and 116 IU/gds EG in 72 h were possible under optimal conditions and substrate concentration. Further investigations on the crude enzyme's stability in the presence of iron oxide nanoparticles (IONPs) revealed that it was thermally stable at 60 °C for up to 8 h. Additionally, the crude enzyme demonstrated pH stability by maintaining its complete activity at pH 6.0 for 8 h in the presence of the optimal dose of 15 mg IONPs. The outcomes of this research may be used to investigate the possibility of producing such enzymes in large quantities at low cost for industrial use.

Kinetics investigation of phenolic pollutant degradation via Serratia marcescens ABHI 001 and its application in wastewater treatment.

In the present work, kinetic study has been conducted in order to effectively eliminate the p-cresol from wastewater employing isolated bacterial strain Serratia marcescens ABHI001 under batch shake flasks in the concentration varying from 50 to 500 mg/L. Further, effects of various parameters including p-cresol concentration, inoculum dosage, temperature, pH and agitation have been investigated. It was found that 10% v/v inoculum of 24 h age, was effective in degrading p-cresol. Beside this, it was noticed that the concentration of P-cresol above 100 mg/L exhibited an inhibitory effect. The maximum specific growth rate (µmax) was obtained to be 0.360 h-1 for 100 mgL-1 concentration. Further, the experimental results were well fitted with Halden's and Andrew's models and kinetic parameters µmax, KS and Ki in case of Haldane model were calculated to be 0.9697 h-1, 88.07 mgL-1 and 219.9 mgL-1, respectively whereas the corresponding values in case of Andrews's constants were 0.6917 h-1, 62.83 mgL-1 and 307.4 mgL-1, respectively. The yield coefficient for the growth on p-cresol was found to be 0.82.

Recent Update on anaerobic digestion of paddy straw for biogas production: Advancement, limitation and recommendations.

At present, development and production of advanced green energy sources are highly demanded, and this may offer a clean and sustainable environment to our modern society. In this reference, biogas is emerging as a promising green energy source and seems to have high potential to replace fossil-fuel based energy sources in the coming future. Further, lignocellulosic biomass (LCB) based biogas production technology has been found to be highly promising owing to several advantages associated therewith. Rich inorganic content, renewable nature, huge availability and low-cost are the key beneficial factors of LCB-based feedstock l to produce biogas. Among the varieties of LCB, paddy straw is one of the most demanding feedstocks and is highly rich in organic compounds that are imperative to producing biogas. Nevertheless, it is noticed that paddy straw as a waste material is usually disposed-off by direct burning, whereas it exhibits low natural digestibility due to the presence of high lignin and silica content which causes severe environmental pollution. On the other hand, paddy straw can be a potential feedstock to produce biogas through anaerobic digestion. Therefore, based on the current ongoing research studies worldwide, this review evaluates the advancements made in the AD process. Meanwhile, existing limitations and future recommendations to improve the yield and productivity of the biogas using paddy straw have been discussed. The emphasis has also been given to various operational parameters developments, related shortcomings, and strategies to improve biogas production at pilot scale.

Biomass valorization of Eichhornia crassipes root using thermogravimetric analysis.

Present study focused on the thermo-chemical potential of waste biomass of Eichhornia crassipes or water hyacinth root (WHR). The pyrolysis-kinetic parameters are investigated using thermo-gravimetric analysis at the various heating rates (5, 10, 15, and 20 °C/min). Three model-free techniques, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, were used for the thermal kinetic analysis of biomass. The average activation energy for WHR biomass was determined using KAS, FWO, and Starink, with the values of 57.87, 64.69, and 58.27 kJ/mol, respectively. From the study it is observed that the roots of water hyacinth have rich in carbon, oxygen and hydrogen composition around 24%, 70% and 4% respectively. The higher heating value of water hyacinth root was observed around 15 MJ/kg.

Improved production of biogas via microbial digestion of pressmud using CuO/Cu2O based nanocatalyst prepared from pressmud and sugarcane bagasse waste.

Biogas production through anaerobic digestions of organic wastes using microbes is a potential alternative to maintain the long term sustainability of the environment and also to full-fill the energy demands and waste management issues. In this context, pressmud can be a vital substrate which is generated from sugarcane industries and found to be broadly available. In this work, biogas improvement has been investigated in presence of CuO/Cu2O based nanocatalyst wherein pressmud is employed as a substrate in anaerobic digestion. Herein, CuO/Cu2O based nanocatalyst has been prepared using the aqueous extract prepared from the combination of PM and SCB which is employed as a reducing agent. The physicochemical properties of CuO/Cu2O nanocatalyst have been probed through different techniques and it is noticed that using 1.0 % CuO/Cu2O based nanocatalyst employed in AD process, cumulative biogas 224.7 mL CH4 /g VS could be recorded after 42 days.

Thermophilic biohydrogen production strategy using agro industrial wastes: Current update, challenges, and sustainable solutions.

Continuously increasing wastes management issues and the high demand of fuels to fulfill the current societal requirements is not satisfactory. In addition, severe environmental pollution caused by generated wastes and the massive consumption of fossil fuels are the main causes of global warming. In this scenario, production of hydrogen from organic wastes is a potential and one of the most feasible alternatives to resolve these issues. However, sensitivity of H2 production at higher temperature and lack of potential substrates are the main issues which are strongly associated with such kinds of biofuels. Therefore, the present review is targeted towards the evaluation and enhancement of thermophilic biohydrogen production using organic, cellulosic wastes as promising bioresources. This review discusses about the current status, development in the area of thermophilic biohydrogen production wherein organic wastes as key substrate are being employed. The combinations of suitable organic and cellulose rich substrates, thermo-tolerant microbes, high enzymes stability may support to enhance the biohydrogen production, significantly. Further, various factors which may significantly contribute to enhance biohydrogen production have been discussed thoroughly in reference to the thermophilic biohydrogen production technology. Additionally, existing obstacles such as unfavorable thermophilic biohydrogen pathways, inefficiency of thermophilic microbiomes, genetic modifications, enzymes stability have been discussed in context to the possible limitations of thermophilic biohydrogen production strategy. Structural and functional microbiome analysis, fermentation pathway modifications via genetic engineering and the application of nanotechnology to enhance the thermophilic biohydrogen production have been discussed as the future prospective.

Enhanced biogas production potential analysis of rice straw: Biomass characterization, kinetics and anaerobic co-digestion investigations.

Present study of the biofuel potential of rice straw (RS) waste biomass materials. The average activation energy of rice straw was determined from KAS, FWO and Starink are 84.11, 89.62 and 84.52 kJ/mol, respectively. The characterized rice straw biomass has been tested for biogas potential under co-digestion mode of rice straw and cow dung in ratio 1/2. The maximum 339 ml/g Vs of biogas has been recorded in 35 days with CH4 concentration of 58.3%. The rest being CO2 as well as H2S has been found in trace amounts with observed 85% total solids and 74% volatile solids, present in rice straw.

Prospects of soil microbiome application for lignocellulosic biomass degradation: An overview.

Sustainable and practically viable biofuels production technology using lignocellulosic biomass is still seeking its way of implementation owing to some major issues involved therein. Unavailability of efficient microbial sources for the degradation of cellulosic biomass is one of the major roadblocks in biomass to biofuels production technology. In this context, utilization of microbiomes to degrade lignocellulaosic biomass is emerging as a rapid and effective approach that can fulfill the requirements of biomass based biofuels production technology. Therefore, the present review is targeted to explore soil metagenomic approach to improve the lignocellulosic biomass degradation processing for the cost-effective and eco-friendly application. Soil microbiomes consist of rich microbial community along with high probability of cellulolytic microbes, and can be identified by culture independent metagenomics method which can be structurally and functionally explored via genomic library. Therefore, in depth analysis and discussion have also been made via structural & functional metagenomics tools along with their contribution to genomic library. Additionally, the present review highlights currently existing bottlenecks along with their feasible solutions. This review will help to understand the basic research as well as industrial concept for the process improvement based on soil microbiome mediated lignocellulosic biomass degradation, and this may likely to implement for the low-cost commercial biofuels production technology.

Acid tolerant multicomponent bacterial enzymes production enhancement under the influence of corn cob waste substrate.

Cellulase enzymes have wide range of industrial application, but high production cost and relatively low efficiency are the main issues, which are needed to resolve. Substrate is known as the main contributor which can bring down the production cost of these enzymes at large scale. Therefore, in the present study, corn cob (Cc) waste has been employed as a potential substrate to produce efficient and good amount of cellulase using the bacterial strain Bacillus subtilis. Under the influence of optimal parameters while using the optimum concentration of Cc (7.0 g), maximum 12 IU/gds FP, 97 IU/gds BGL and 129 IU/gds EG have been recorded. Additionally, crude enzyme showed maximum FP activity of 14 IU/gds using 1.0 g/L peptone employed as the optimum organic nitrogen source. The bacterial cellulase exhibits temperature tolerance ability at 55 °C, and retains its half-life activity for 5 h and pH tolerance at pH 7.0 up to 55% of the relative activity. The results recorded in the present study may have potential for the large-scale and low-cost bacterial cellulase production using cellulose rich substrate e.g. Cc waste that can be vital for numerous industrial applications.

Functional microbiome strategies for the bioremediation of petroleum-hydrocarbon and heavy metal contaminated soils: A review.

Petroleum hydrocarbons and heavy metals are the two major soil contaminants that are released into the environment in the forms of industrial effluents. These contaminants exert serious impacts on human health and the sustainability of the environment. In this context, remediation of these pollutants via a biological approach can be effective, low-cost, and eco-friendly approach. The implementation of microorganisms and metagenomics are regarded as the advanced solution for remediating such pollutants. Further, microbiomes can overcome this issue via adopting specific structural, functional and metabolic pathways involved in the microbial community to degrade these pollutants. Genomic sequencing and library can effectively channelize the degradation of these pollutants via microbiomes. Nevertheless, more advanced technology and reliable strategies are required to develop. The present review provides insights into the role of microbiomes to effectively remediate/degrade petroleum hydrocarbons and heavy metals in contaminated soil. The possible degradation mechanisms of these pollutants have also been discussed in detail along with their existing limitations. Finally, prospects of the bioremediation strategies using microbiomes are discussed.

Sustainable production of algae-bacteria granular consortia based biological hydrogen: New insights.

Microbes recycling nutrient and detoxifying ecosystems are capable to fulfil the future energy need by producing biohydrogen by due to the coupling of autotrophic and heterotrophic microbes. In granules microbes mutualy exchanging nutrients and electrons for hydrogen production. The consortial biohydrogen production depend upon constituent microbes, their interdependence, competition for resources, and other operating parameters while remediating a waste material in nature or bioreactor. The present review deals with development of granular algae-bacteria consortia, hydrogen yield in coculture, important enzymes and possible engineering for improved hydrogen production.

Waste biomass based potential bioadsorbent for lead removal from simulated wastewater.

Present study deals with the lead removal from simulated wastewater using cost effective bio-adsorbent of mango seeds cover with kernel (M), and jamun seeds cover with kernel (JP). Lead removal optimization of adsorption parameters has been analyzed by using Response surface methodology (RSM). The optimum adsorption was attained at speed of 500 rpm, 60 mg, pH 6.5 and contact time of 120 min. The adsorption capacities are around 39.15 mg/g of M and 20.28 mg/g of JP bio-adsorbent, and also the maximum Pb removal were observed Ì´ 94.85% and 92.78%, respectively. The regression coefficient was best fitted for both bio-adsorbents are Freundlich model and pseudo-first order reaction kinetic.

Waste seeds of Mangifera indica, Artocarpus heterophyllus, and Schizizium commune as biochar for heavy metal removal from simulated wastewater.

The threat of arsenic contamination in water is a challenging issue worldwide. Millions of people utilize untreated groundwater having high levels of arsenic in developing countries. Design Expert 6.0.8 has been used to design experiments and carried out statistical analysis for optimization of different parameters. It is of prime importance to develop cheap environment friendly bio-sorbent for protecting health of the poor from ill effects of arsenic. In the present investigation, we prepared bio-sorbent from the solid waste seed biomass of Mangifera indica (M), Artocarpus heterophyllus (JF), and Schizizium commune (JP). The characterization of bio-sorbents has been done by using different techniques namely FTIR and XRD. Arsenic concentration was estimated using ICP and adsorption parameters optimized for pH, adsorbent dose, and initial arsenic concentration. At pH 8.4, kinetics study of arsenic removal was M (94%), JF (93%), and JP (92%) for initial concentration of 2.5 ppm. The adsorption kinetics was well explained by Freundlich model and pseudo-second reaction order. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s13399-021-02078-5.